The control button configuration may vary slightly depending on the monitor model.
Monitor Buttons | Remote Control Buttons
1. Monitor Buttons
For more information about screen adjustment, refer to On-Screen Display.
1. Input Signal Indicators
If the Source or PIP button is pressed, the corresponding indicator turns on to indicate the input signal
currently displayed on the screen. When PIP button is pressed, two signal indicators turn on: (Indicator
color: Green)
2. Source button
Turns on the indicator to indicate the currently displayed input signal.
To switch Screen modes: PC --> Video --> S-Video --> TV (Press here to view Screen Mode Switching
Animation Clips)
3. PIP button
In PC Mode, turns on Video or TV screens in PIP mode. Using this function, you may view a Video or
TV program while performing PC work. To deactivate PIP mode, press the Exit button. (Exit button
works in PC mode only.)
To switch Screen modes: PC + Video --> PC + S-Video --> PC + TV (Press here to view Screen Mode
Switching Animation Clips)
4. Exit button / Auto button
When screen adjustment menu is on: Exit button exits from the menu screen or closes screen
adjustment menu. Also turns off PIP screens when pressed in PIP mode.
When screen adjustment menu is off: Auto button adjusts the screen automatically. For more
information, refer to Direct-Access Features > Automatic Save.
5. Menu( ) button
Use this button to open the OSD and activate a highlighted menu item.
6. Power button / Power indicator
Use this button to turn the monitor on and off. Power Indicator shows PowerSaver mode by green
blinking. Refer to Specifications > PowerSaver.
User's Manual - 28
Adujust Monitor-User control buttons
To Next Page
Loading...
