The monitor supports VESA mounting standard for use with various VESA mounting devices.
This monitor accepts a 75mm x 75mm (100mm x 100mm: 17 inch) VESA-compliant mounting
interface pad. You need to fold the monitor base before installing a VESA base.
Align the four bolt holes (1) on the monitor base with the holes (2) on the VESA base and then fasten
the base with the four bolts (3) supplied.
Only the supplied bolts should be used.
Samsung Electronics will not be responsible for damages caused by using a base other than those
specified.
User's Manual - 27
Setup-Installing a VESA Base
To Next Page
Loading...
