When cleaning the monitor case or the surface of the TFT-LCD, wipe with a slightly
moistened, soft fabric.
Do not spray detergent directly on the monitor.
Use the recommended detergent with a smooth cloth.
If the connector between the plug and the pin is dusty or dirty, clean it
properly with a dry cloth.
l
A dirty connector can cause an electric shock or fire.
Do not set a glass of water, chemicals or any small metal objects on the
monitor.
l
This may cause damage, electric shock or a fire.
l
If a foreign substance gets into the monitor, disconnect the plug and then
contact a service center.
User's Manual - 6
Safety Instructions-Cleaning
To Next Page
Loading...
