Red
MENU → → ENTER → [Picture] → → → → ENTER → [Color Control] → ENTER
→ [Red]
→ , → ENTER
Green
MENU → → ENTER → [Picture] → → → → ENTER → [Color Control] → → ENTER
→ [Green]
→ , → ENTER
Blue
MENU → → ENTER → [Picture] → → → → ENTER → [Color Control] → → →
ENTER → [Blue]
→ , → ENTER
Color Temp.
MENU → → ENTER → [Picture] → → → → ENTER → [Color Temp.]
→ , → ENTER
Color Temp is a measure of the 'warmth' of the image colors.
(Not available in Dynamic Contrast mode of On.)
Note
This function is only enabled if the Color Tone is set to Off.
Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates un-
stable images with jitters and shakiness. If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use Fine again.
(Available in PC mode only)
(Not available in Dynamic Contrast mode of On.)
MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock]
Adjusting the LCD Display
To Next Page
Loading...
