Multi Control
Available Modes
•
PC / DVI
•
AV
•
HDMI
•
MagicInfo
Multi Control
Assigns an individual ID to the SET.
MENU →
→ → → → ENTER → [Multi Control ] → ENTER
→ , → [0~9]
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use to select the transmitter functions of the individual SET. Only a SET where the ID
corresponds to the transmitter setting becomes activated.
MagicInfo
Available Modes
•
PC / DVI
•
AV
•
HDMI
•
MagicInfo
Note
• For MagicInfo, a remote control is available for MagicInfo. However, it is recommended
using a separate USB keyboard.
• For MagicInfo in Device mode, moving external devices while booting may cause errors.
Set up external devices only if the LCD Display turns on.
Adjusting the LCD Display
To Next Page
Loading...
