Coarse
MENU → → ENTER → [Picture] → → → → → ENTER → [Image Lock] → ENTER
→ [Coarse]
→ , → ENTER
Removes noise such as vertical stripes. Coarse adjustment may move the screen image
area. You may relocate it to the center using the horizontal control menu.
Fine
MENU →
→ ENTER → [Picture] → → → → → ENTER → [Image Lock] → →
ENTER → [Fine]
→ , → ENTER
Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat
it after adjusting the frequency (clock speed).
H-Position
MENU →
→ ENTER → [Picture] → → → → → ENTER → [Image Lock] → →
→ ENTER → [H-Position]
→ , → ENTER
Adjusts the screen location horizontally.
V-Position
MENU →
→ ENTER → [Picture] → → → → → ENTER → [Image Lock] → →
→ → ENTER → [V-Position]
→ , → ENTER
Adjusts the screen location vertically.
Auto Adjustment
MENU → → ENTER → [Picture] → → → → → → ENTER → [Auto Adjustment ]
The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in PC mode only)
Adjusting the LCD Display
To Next Page
Loading...
