The screen can be divided into several images. A number of screens can be selected with a
different layout when dividing.
• Select a mode in Screen Divider.
• Select a display in Display Selection.
• The selection will be set up by pressing a number in the selected mode.
Safety Screen
The Safety Screen function is used to prevent afterimages that may appear when a still
picture is displayed on the screen over a long time.
• The Safety Screen function scrolls the screen for the specified period of time.
• This function is not available when the power is turned off.
MENU →
→ → → ENTER → → → → → → → → → ENTER →
Pixel Shift
Pixel Shift
MENU → → → → ENTER → → → → → → → → → ENTER →
→ ENTER → → ENTER → → , → ENTER
To prevent after-images on the screen you can use this function have pixels move on the
LCD in the horizontal or vertical direction.
1. Off
2. On
Horizontal
MENU →
→ → → ENTER → → → → → → → → → ENTER →
→ ENTER → → → ENTER → → , → ENTER
Sets how many pixels the screen moves horizontally.
Five adjustment levels: 0, 1, 2, 3, and 4.
Adjusting the LCD Display
To Next Page
Loading...
