English - 25
How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it.
The screen will go blank and the following message will appear:
1. Enter your PIN, then press the E button and press the ▲ or ▼
button to temporarily disable the V-Chip Lock.
If you forget the PIN, press the remote-control buttons in the N
following sequence, which resets the pin to 0-0-0-0 : POWER
(off) → MUTE → 8 → 2 → 4
→ POWER (on)
Caption ❑ (On-Screen Text Messages)
Caption→Off/On
You can switch the caption function on or off. If captions are not available, they will not be displayed
on the screen.
Press the O CC button on the remote control to turn the Caption on or off.
The Caption feature doesn’t work in HDMI , PC or DVI modes. N
Caption Mode
You can select the desired caption mode.
The availability of captions depends on the program being broadcast. N
Default / CC1~CC4 / Text1~Text4 ● (analog channels only)
The Analog Caption function operates in either analog TV channel mode or when a signal is
supplied from an external device to TV. (Depending on the broadcasting signal, the Analog
Caption function may operate on digital channels.)
Default / CC1~CC4 / Text1~Text4 / Service1~Service6 ● (digital channels only)
The Digital Captions function operates on digital channels.
Service1~6 in digital caption mode may not be available depending on the broadcast. N
Digital Caption Options (digital channels only)
Size ● : This option consists of “Default”, “Small”, “Standard” and “Large”. The default is
“Standard”.
Font Style ● : This option consists of “Default”, “Style0 ~ Style 7”. You can change the font you
want. The default is “Style 0”.
Foreground Color ● : This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”,
“Yellow”, “Magenta” and “Cyan”. You can change the color of the letter. The default is “White”.
Background Color ● : This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”,
“Yellow”, “Magenta” and “Cyan”. You can change the background color of the caption. The
default is “Black”.
Foreground Opacity ● : This option consists of “Default”, “Transparent”, “Translucent”, “Solid”
and “Flashing”. You can change the opacity of the letter.
Background Opacity ● : This option consists of “Default”, “Transparent”, “Translucent”, “Solid”
and “Flashing”. You can change the background opacity of the caption.
Return to Default ● : This option sets each of “Size”, “Font Style”, “Foreground Color”,
“Background color”, “Foreground Opacity” and “Background Opacity” to its default.
“ N Digital Caption Options” are available only when “Default” and “Service1~Service6” can be
selected in “Caption Mode”.
The availability of captions depends on the program being broadcast. N
“ N Default” means to follow the standard set by the broadcaster.
Foreground and Background cannot be set to have the same color. N
“ N Foreground Opacity” and “Background Opacity” cannot be both set to Transparent.
Received Rating: TV-14/NL
This channel is blocked by a Parental Lock. Prees enter the PIN
to unblock.
CH
Change
0~9
Enter PIN
To Next Page
Loading...
