Samsung SyncMaster 933HD Plus - Setting Up Anynet+

English - 29
Setting Up Anynet+ ¦
Press the T TOOLS button to display the Tools menu. You can
also display Anynet
+
menu by selecting Tools→Anynet
+
(HDMI-CEC).
Setup ❑
Anynet 
+
(HDMI-CEC)→Off/On
To use the Anynet
+
Function, Anynet
+
(HDMI-CEC) must be set to On.
When the N Anynet
+
(HDMI-CEC) function is disabled, all the
Anynet
+
related operations are deactivated.
AutoTurnOff→No/Yes 
Setting an Anynet
+
Device to turn Off Automatically when the TV
is Turned Off
The active source on the TV remote must be set to TV to use N
the Anynet
+
function.
If you set N Auto Turn Off to Yes, connected external devices
are also turned off when the TV is turned off. If an external
device is still recording, it may or may not turn off.
Anynet
+
(HDMI-CEC)  ►
Application
Device List
Setup
U Move E Enter R Return
Anynet
+
(HDMI-CEC) : On
Auto Turn Off : Yes
U Move E Enter R Return
Setup
BN59-00905F_eng.indd 29 2009-11-10 9:30:45