Great user manuals database on UserManuals.info
60
Screen Setup
4
4 Screen Setup
4.2 Brightness
Adjust the general brightness of the picture. (Range: 0~100)
A higher value will make the picture appear brighter.
z This menu is not available when Bright is set to Dynamic Contrast mode.
z This menu is not available when Eco Light Sensor or Eco Saving is set to On.
4.2.1 Configuring Brightness
1 Press [ ] on the product.
2 Press [ ] to move to PICTURE and press [ ] on the product.
3 Press [ ] to move to Brightness and press [ ] on the product. The following screen will
appear.
4 Adjust the Brightness using the [ ] button.
PICTURE
MAGIC
Brightness
Contrast
Sharpness
Coarse
Fine
Response Time
50
60
75
AUTO
2200
0
Faster
To Next Page
Loading...
