Samsung SyncMaster C24A650X

Great user manuals database on UserManuals.info
77
Setup and Reset
7
7 Setup and Reset
7.1.4 Analog
You can view the Analog cable connection status between the product and a PC.
z The connection status will be shown even when the input source is not Analog mode.
z Selecting the Analog option when an analog cable is connected will automatically change the input
source to Analog mode.
Configuring Analog
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating
that an analog cable is connected or disconnected.
4 If an analog cable is connected, press [ ] to move to Analog and press [ ]. The input source
will automatically switch to Analog mode.
MENU
ࢇࢷ֩Ѝ ۴ࢇѰ







HUB
Auto Wireless Detection
Wireless Connection
USB Connection
Analog
HDMI
USB Super Charging
Wireless ID
Off
Disconnected
Connected
Off
Disconnected
Disconnected
- - - - - - - - - - - - - - - - -
ࢇࢷ֩Ѝ ࣏ࢽ
۴
AUTO