Great user manuals database on UserManuals.info
76
Setup and Reset
7
7 Setup and Reset
7.1.3 USB Connection
You can view the USB cable connection status between the product and a PC.
z The connection status will be shown even when the input source is not USB mode.
z Selecting USB Connection when a USB cable is connected will automatically change the input
source to USB mode.
Configuring USB Connection
1 Press [ ] on the product.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3 Press [ ] to move to HUB and press [ ] on the product. A message will appear indicating
that a USB cable is connected or disconnected.
4 If a USB cable is connected, press [ ] to move to USB Connection and press [ ]. The input
source will automatically switch to USB mode.
+8%
$XWR:LUHOHVV'HWHFWLRQ
:LUHOHVV&RQQHFWLRQ
86%&RQQHFWLRQ
$QDORJ
+'0,
86%6XSHU&KDUJLQJ
:LUHOHVV,'
2II
&RQQHFWHG
'LVFRQQHFWHG
2II
'LVFRQQHFWHG
'LVFRQQHFWHG
AUTO
To Next Page
Loading...
