Troubleshooting 4-1
4 Troubleshooting
4-1 Monitor Self-Diagnosis
• You can check if the product is working properly using the Self-Diagnosis function.
• After connectting the product to PC properly, if a blank screen is displayed, use the Self-Diagnosis function with the
following steps.
1. Turn the product and the PC off.
2. Separate the signal cable from the product .
3. Turn the product on.
4. If the product is working properly, the <Check Signal Cable> icon will appear on the screen.
In this case, if a blank screen is displayed again, make sure that there is no problem with the PC and the connection. The
product is working properly.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
