26
English
Basic Features
■ Multi-Track Sound (MTS)
(analog channels only)
– Mono: Choose for channels that are broadcasting in
mono or if you are having difficulty receiving a stereo
signal.
– Stereo: Choose for channels that are broadcasting in
stereo.
– SAP: Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
x
Depending on the particular program being broadcast, you
can listen to Mono, Stereo or SAP.
SPDIF Output
(It's not available for TB300 series.)
SPDIF (Sony Philips Digital InterFace) is used to provide digital
sound, reducing interference going to speakers and various digital
devices such as a DVD player.
■ Audio Format: You can select the Digital Audio output (SPDIF)
format.
✎
The available Digital Audio output (SPDIF) format may
differ depending on the input source.
■ Audio Delay: Correct audio-video sync problems, when
watching TV or video, and when listening to digital audio
output using an external device such as an AV receiver (0ms ~
250ms).
Speaker Settings
■ Speaker Select (External Speaker / TV Speaker):A sound
echo may occur due to a difference indecoding speed between
the main speaker and theaudio receiver. In this case, set the TV
to External Speaker.
✎
When Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
✎
When Speaker Select is set to External Speaker.
x
TV Speaker: Off, External Speaker: On
✎
When Speaker Select is set to TV Speaker.
x
TV Speaker: On, External Speaker: On
✎
If there is no video signal, both speakers will be mute.
✎
It's not available for TB300 series.
■ Auto Volume (Off / Normal / Night): To equalize the volume
level on each channel, set to Normal.
Night: This mode provides an improved sound experience
compared to Normal mode, making almost no noise. It is
useful at night.
Reset Sound (Yes/No)
Reset all sound settings to the factory defaults.
System Menu
MENU
m
→ System → Time → ENTER
E
Time
■ Clock: Setting the clock is for using various timer features of
the TV.
✎
The current time will appear every time you press the
INFO button.
✎
If you disconnect the power cord, you have to set the
clock again.
Clock Mode (Auto / Manual)
– Auto: Set the current time automatically using the time
from a digital channel.
✎
The antenna must be connected in order to set the
time automatically.
– Manual: Set the current time manually.
✎
Depending on the broadcast station and signal, the
auto time set up may not be correct. In this case, set
the time manually.
Clock Set: Set the Day, Month, Year, Hour, Minute and am/pm.
✎
Available only when Clock Mode is set to Manual.
✎
You can set the Day, Month, Year, Hour and Minute
directly by pressing the number buttons on the remote
control.
Time Zone: Select your time zone.
✎
This function is only available when the Clock Mode is
set to Auto.
Using the Sleep Timer
■ Sleep Timer
t
: Automatically shuts off the TV after a
preset period of time. (30, 60, 90, 120, 150 and 180 minutes).
✎
To cancel the Sleep Timer, select Off.
Setting the On / Off Timer
You can set the TV to turn on automatically at a preset time.
■ On Timer 1 / On Timer 2 / On Timer 3: Three different on
timer settings can be made. You must set the clock first.
On Timer 1
Setup Off
Source TV
Volume 20
Time 0:00 am
Antenna Air
Channel 3
MonSun Tue Wed Thu Fri Sat
R
Return
Close
To Next Page
Loading...
