Using the product 3-6
SIZE & POSITION
SETUP&RESET
Menu Description
H-Position Moves the position of the display area on the screen horizontally.
This function is only available in <Analog> mode.
V-Position Moves the position of the display area on the screen vertically.
This function is only available in <Analog> mode.
Image Size
•
<Auto>
- The picture is displayed at the aspect ratio of the input signal.
• <Wide> - The picture is displayed in full screen regardless of the aspect ratio of the input signal.
• A signal not in the standard mode table is not supported.
• If the resolution is set to the optimal resolution, the aspect ratio does not change whether the
<Image Size> is set to <Auto> or <Wide>.
Menu H-Position You can adjust the horizontal position of the OSD.
Menu V-Position You can adjust the vertical position of the OSD.
Menu Description
Reset Use this function to restore the visual quality and color settings to the factory defaults.
• <No> - <Yes>
Menu Transparency You can select the transparency of the OSD.
• <Off> - <On>
To Next Page
Loading...
