22
Preparations
1
1 Preparations
Icons Description
Configure Customized Key and press [ ]. The following options will
be enabled.
Angle - Bright - Image Size
To configure Customized Key, go to SETUP&RESET
Customized Key and select the mode you want.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Adjust the screen brightness.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Digital/Analog). If you power on the product or
change the input source by pressing the [ ] button, a message that
shows the changed input source will appear at the top left corner of the
screen.
Press the [ ] button to automatically adjust the screen settings.
z Available only in Analog mode.
z Changing the resolution in Display Properties will activate the
Auto Adjustment function.
Turn the screen on or off.
(Power lamp)
The power indicator will be lit when the product is operating normally.
z Refer to "11.2 PowerSaver"for details about the power-saving
function.
z To reduce power consumption, it is best to remove the power
cable when you will not be using the product for an extended
period of time.
Power on or off the product.
To Next Page
Loading...
