Samsung SyncMaster TS190W - Connecting Monitor to WES7 System

30
Using "Windows Embedded Standard 7"
2
2 Using "Windows Embedded Standard 7"
2.2 Connection to Use "Windows Embedded Standard 7"
2.2.1 Connection Using the D-SUB Cable (Analogue Type)
1 Connect the D-SUB cable to [RGB IN] on the back of the monitor and [RGB OUT] on the stand
base.
2 Connect the DC power adapter to the product and a power outlet. Next, turn on the power switch
on the stand base.
(For details, refer to "3.3 Connecting the Power".)
3 Press [ ] to change the input source to Analog.
2.2.2 Connection Using the DVI Cable
1 Connect the DVI cable to [DVI IN] on the back of the monitor and [DVI OUT] on the stand base.
2 Connect the DC power adapter to the product and a power outlet. Next, turn on the power switch
on the stand base.
(For details, refer to "3.3 Connecting the Power".)
3 Press [ ] to change the input source to Digital.
RGB OUTRGB IN
DVI OUTDVI IN