17
English
Connections
Digital audio system
Connecting to a Audio device and PC
Using an Optical (Digital) or a Headphone Connection
DIGITAL
AUDIO OUT
(OPTICAL)
TB300 series have not headphone and Optical interface.
✎
DIGITAL AUDIO OUT (OPTICAL)
x
When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the
LED display and the system.
x
5.1 CH (channel) audio is available when the LED display is connected to an external device supporting 5.1 CH.
x
When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack. When the TV is
receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver. When the source is a digital component
such as a DVD / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and is connected to the TV via HDMI, only
2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack
from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
✎
Headphones
H
: You can connect your headphones to the headphones output on your set. While the headphones are
connected, the sound from the built-in speakers will be disabled.
x
Sound function may be restricted when connecting headphones to the LED display.
x
Headphone volume and LED display volume are adjusted separately.
Using an HDMI cable or an HDMI to DVI cable or a D-sub cable
✎
Connecting through the HDMI cable may not be supported depending on the PC.
HDMI Cable
(Not Supplied)
HDMI to DVI
(Not Supplied)
Stereo Cable
Stereo Cable
D-Sub Cable
To Next Page
Loading...
