2"&6+
)6&6#;Find the source signal automatically (On / Off)
'&;No / Yes
..*5;Off / On (Support minimum 1h ~ maximum 23h)
6'&5/B:;MagicBright / Live color / Color Effect / Image Size
5%/;Be able to control when it is not the wide resolution.
#$D; Normal / Low
(When input signal is RGB signal, let black level of the screen lower one grade for 16 gray color
standard.)
) 5;On / Off
(When input signal is video timing, let the screen be overscan and Hotplug function turn on.)
G0#$D) 5#?'@4&45': 0
G0#4%@4?&4+6&'%' ) 5'0
&6+H5%/ : 4:3 / Wide / Just Scan
#&6H#&65 : Dynamic / Standard / Movie / Custom
G0F6'&#
1) Full screen is displayed without losing the data on the left and right side when just scan mode is
‘On’ after connecting to HDMI 1080i. But the garbage part can be appeared on the top and bottom
side of the screen because monitor panel is 16:10 panel unlike the TV panel.
2) It can be seen enlarged screen to entire panel without losing the data on the left and right side
when just scan mode is ‘On’ after connecting to HDMI 720p.
3) Just Scan mode is not worked under the 720p mode.
2,.5&
Source, Frequency, Resolution Display
5. OSD Cont r ol ( 3)
5. OSD Cont r ol ( 3)
To Next Page
Loading...
