By clicking the “UPDATE” button ( ), you can download the latest software (“SW”) or firmware (“FW”) and
update it.
By clicking the “Check for Update Automatically” toggle button ( ), you can choose whether to have SW and FW
automatically updated whenever Samsung Portable SSD is connected.
By clicking the refresh button ( ), you can refresh the update status.
By clicking the arrow down button ( ), you can see detailed information on the applicable update.
* When the user changes “Check for Update Automatically” from OFF to ON, SW does not refresh update
information immediately. Update information is refreshed when either user clicks the refresh button or Samsung
Portable SSD is connected to the computer.
* For FW updates, security mode needs to be OFF. Any access to T7, including copying/deleting /formatting partition,
while FW is being updated, may cause abnormal behavior or damage to the T7.
* Once FW has been updated, please disconnect and reconnect T7 to ensure that the FW update was successful.
6. Delete “Samsung Portable SSD Software”
Deleting software on each OS
To Next Page
Loading...
