12
Getting Started
English
Viewing the Control Panel
✎
The product colour and shape may vary depending on the model.
SOURCE
E
Toggles between all the available input sources. In the on-screen menu, use this button as
you would use the ENTER
E
button on the remote control.
MENU Displays an on-screen menu, the OSD (on screen display) of your LED display's features.
Y
Adjusts the volume. In the OSD, use the
Y
buttons as you would use the
l
and
r
buttons on the remote control.
z
Changes the channels. In the OSD, use the
z
buttons as you would use the
u
and
d
buttons on the remote control.
P
(Power)
Turns the LED display on or off.
Power Indicator Blinks and turns off when the power is on and lights up in standby mode.
Remote control sensor Aim the remote control towards this spot on the LED display.
Standby mode
Do not leave your LED display in standby mode for long periods of time (when you are away on a holiday, for example). A small
amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
Control Panel
To Next Page
Loading...
