58
Viewing Detailed Information
You can view detailed information about a selected program. The program information may differ
depending on the broadcast signal and may not be available at all for certain programs.
●
Select a current program on another channel, and then View Details to Watch the program.
●
Select an upcoming program, and then select View Details to set up a Schedule Viewing.
"
For more information about watching or Schedule Viewing refer to "Setting Up a Schedule Viewing".
Checking Current Program Info
To get information about a show, press INFO on your remote.
"
To view the program info, you must first set the TV's clock. Go to Clock (System > Time > Clock).
"
The program information may vary depending on the type of incoming signal and may not be available at
all for certain programs.
Use the
¡
and
£
buttons to view information about upcoming programs. Select a program to set up a
Schedule Viewing for that program.
For more information on Schedule Viewing, refer to "Setting Up a Schedule Viewing".
Changing the broadcast signal
MENU > Broadcasting > Antenna
Try Now
You can choose the appropriate DTV mode for your viewing environment. Choose Air or Cable. Air is
suitable for homes equipped with a separate, over-the-air antenna. Cable is suitable for homes that
have subscribed to a local cable-service or satellite-service provider.
"
Do not use this function if your TV is connected to a cable or satellite box.
Digital Channel Signal Info and Strength
MENU > Support > Self Diagnosis > Signal Information
Try Now
Select Support > Self Diagnosis > Signal Information. This displays the digital channel's signal
information and strength.
"
If your TV is attached to a separate, over-the-air antenna, you can use the signal strength information to
adjust the antenna for increased signal strength and improved HD channel reception.
"
Signal information is only available for digital channels.
To Next Page
Loading...
