Troubleshooting Internet Connectivity Issues
Troubleshooting wired Internet connectivity issues
Try Now
No network cable found
Make sure that the network cable is plugged in. If it is connected, make sure that the router is turned
on. If it is on, try turning if off and on again.
IP auto setting failed
Do the following or configure the IP Settings manually.
1.
Make sure that the DHCP server is enabled on the router, and reset the router.
2.
If the problem persists, contact your Internet Service Provider.
Unable to connect to the network
1.
Check all IP Settings.
2.
Make sure that the DHCP server is enabled on the router. Then, unplug the router and plug it back
in.
3.
If this does not work, contact your Internet Service Provider.
To Next Page
Loading...
Need help?
General
