Tuning analogue channels
MENU Broadcasting Channel Settings Manual Tuning Analogue Channel Tuning
Select New and configure Programme, Colour System, Sound System, Channel, and Search to scan
for analogue channels. Then, select Store to store the scanned channels in the TV.
"
This function is only available for analogue broadcasts.
Channel mode
●
P (programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
●
C (aerial channel mode) / S (cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
Fine-Tuning the screen
MENU Broadcasting Channel Settings Fine Tune
Try Now
When analogue pictures become shaky and full of noise, fine-tune the signal to clear up the picture.
"
This function is only available for analogue broadcasts.
To Next Page
Loading...
Need help?
General
