◀ ▶
How to set up manually
To set up your TV’s cable network connection manually, follow these steps:
1.
Follow Steps 1 through 7 in the “How to set up automatically” procedure.
2.
Select the IP Settings on network test screen.
3.
Set IP Mode to Manual.
4.
Press the
▼
button on your remote to go to the first entry field.
5.
Enter the IP Address, Subnet Mask, Gateway, and DNS Server values.
Use the number buttons on your remote to enter numbers and the arrow
buttons to move from one entry field to another.
6.
When done, select the OK.
7.
The network connection screen appears, and network setting is done.
English
To Next Page
Loading...
