◀ ▶
■
Network Setup (WPS(PBC))
How to set up using WPS(PBC)
If your router has a WPS(PBC) button, follow these steps:
1.
Go to Network Settings screen. To enter it, follow the directions of Network
Settings.
2.
Select the WPS(PBC).
3.
Press the WPS(PBC) button on
your router within 2 minutes. Your
TV automatically acquires all the
network setting values it needs
and connects to your network.
4.
The network connection screen
appears, and network setting is
done.
U
Move
E
Enter
R
Return
Network Settings
Select a network connection type.
Wired
Wireless
(general)
WPS(PBC)
One Foot
Connection
Connect to the wireless router easily by pressing the
WPS(PBC) button. Choose this if your wireless router
supports Push button configuration(PBC).
English
To Next Page
Loading...
