Samsung UN NU710DF Series - Software Updates

4-11. Updating the TV’s Software
SoftwareUpgradecanbeperformedbynetworkconnectionordownloadingthelatestrmwarefrom“www.samsung.
com.” to a USB memory device.
4-11-1. By USB
DownloadthermwareimageandsaveitinafolderontherootdirectioryoftheUSBashdrive.Thefoldernamemust
be"rmwarename".
InsertaUSBdrivecontainingthermwareupgradele,downloadedfrom“www.samsung.com,”intotheTV.Pleasebe
carefulnottodisconnectthepowerorremovetheUSBdriveuntilupgradesarecomplete.TheTVwillbeturnedoand
onautomaticallyaftercompletingthermwareupgrade.Whensoftwareisupgraded,videoandaudiosettingsyouhave
made will return to their default settings. We advise you to to write down your settings so that you can easily reset them
after the upgrade.
4-11-2. By Online
Upgrades the software using the Internet.
First,congureyournetwork.FordetailedproceduresonusingtheNetworkSetting,refertothe‘Settingthe•
Network’ instructions.
If The internet connection doesn’t operate properly, connection can be broken, please retry downloading.•
If the problem still happens, download by USB and upgrade.
4-11-3. Stanby mode upgrade(O/On)
A manual upgrade will be automatically performed at selected time.
Since the power of the unit is turned on internally, the screen may be turned on slightly for the LED product. This
phenomenon may continue for more than 1 hour until the software upgrade is complete.
4-52
4. Troubleshooting