3-2
3. Disassembly and Reassemble
Description & Screws Picture Description
3-1
Removing the 'ASSY REAR COVER'.
(Please follow 8 sequence on right.)
Ready to insert open jig 1.
adjust jig edge to hole.
Rotate open jig to 90-degree.
3.
Insert hand and retain gap.5.
Insert open jig till red line.7.
Insert open jig till red line.2.
Lift jig to unlock wire hook 4.
on bottom.
Take out jig and insert in
6.
side gap.
Disassemble Hooks of
8.
Cover Rear along the side.
3-2
Disassemble all Hooks of Cover Rear along the
three side.
Jig Direction
Jig Direction
Jig Direction
To Next Page
Loading...
