TV Viewing
The displayed image may differ depending on the modet,
Use this feature to view the program guide and program information more easily. However, these
features are not available when viewing TV using a cable box or satellite receiver.
Program mnfo
Select the Virtual Remote panel's IINIFObutton while watching TV to view information about the current
program.
However, Program Info is only available with digital channels. In order to use the Program Info,
you must first set the TV's clock. To set the clock, navigate to Clock (System > Time > Clock). The
Program Info may vary depending on the type of incoming signal and may not be available at all for
certain programs.
Drag left/right on the touchpad to check out other programs or tap on the touchpad to set up a
Schedule Viewing setting for the selected program.
Refer to the "Schedule Viewing" section for more information about Schedule Viewing settings.
Change the Broadcast Signal
Screen Menu > Broadcasting > Antenna
Choose an antenna to receive digital broadcast signals from.
To Next Page
Loading...
