Samsung UN32F5500 - Guide; Change Channels; Change Category; Quick Search

ScreenMenu> Broadcasting> Guide
Vieweachdigital channel'sprogrammingschedule.Checkthe programmingschedulesandevensetup
a ScheduleViewing.Pressthe GUIDEbuttonto launchthe guide.
Change Channels
Select a channel from Guide to jump to that channel right away,
Change Category
PDP 5500, LED6400 series and above
Select the [_ button on the virtual control panel to change the desired category,
LED 5500 and 6300 series
Press the [_ button to change the desired category,
Quick Search
PDP 5500, LED6400 series and above
Select the [] button on the virtual control panel. A popup window will open. Dragging left or right
on the touchpad moves the focus two hours back or forward, enabling faster browsing of the
programming schedule. However, the focus cannot be on a time prior to the current time.
LED 5500 and 6300 series
Press the [] button. A popup window will open. Each press of the left or right arrow button moves the
focus 2 hours back or forward, enabling faster browsing of the programming schedule. However, the
focus cannot be on a time prior to the current time.
Schedule Viewing
Select a program that you wish to view, and then the Virtual Remote panel's or the regular remote's
IHIFO button to display the detailed information screen. Select Schedule Viewing from the detailed
information screen to set up a ScheduNe Viewing. Schedule Viewing is only available for programs
that haven't aired yet.
PDP 5500, LED6400 series and above
Select the _ button on the virtual control panel and navigate to the Schedule Manager screen to view
a list of reserved programs.
LED 5500 and 6300 series
Press the _ button and navigate to the ScheduNe Manager screen to view a list of reserved programs.
Checking the Program _nfo
Highlight a program and select the _HFO button on the virtual control panel or press the IHFO button
on regular remote control. This displays detailed information about the highlighted program. The
Program Info may vary depending on the type of incoming signal and may not be available at all for
certain programs.