Adjusting the Sound Settings
Screen Menu > Sound > Sound Effect
Use sound effects to alter how the TV projects sound. These options are available only when Speaker
Sebct is set to TV Speaker and Sound Mode is set to Standard.
. DTS TruSurround: Produces sound that will make you feel like you are sitting in a movie theater
or concert hall.
- DTS TruDiab9: Increases the voice intensity to make dialog clearer.
- Equalizer: Adjusts the speaker balance and makes bandwidth adjustments. Select Reset to reset
the settings. _:_
Auto Volume
Screen Menu > Sound > Speaker Settings > Auto VoBme
Because each station has its own set of broadcasting conditions, the volume may fluctuate as the
channel changes. The Auto Volume function automatically adjusts the volume of a channel by lowering
or raising the sound output. Normal applies a normal level of volume adjustment, whereas Night
applies a slightly lower volume level than Norman and is ideal for nighttime TV viewing. To use the
volume control of a connected source device, deactivate the Auto Volume function. When using the
Auto Volume function with a source device, the device's volume control may not function properly.
TV mnsta Mation Type
Screen Menu > Sound > Speaker Settings ) TV _nstaIBtion Type
Select the TV's installation type. Choose between Wall Mount and Stand to optimize the TV's sound
automatically.
Resetting the Sound
Screen Menu > Sound > Reset Sound
This resets all sound settings to the factory defaults.
To Next Page
Loading...
