If malicious code is detected...
If malicious code was found, the results of the scan will appear on the screen. This result window
displays all malicious code found, and provides options to either quarantine the code or allow them to
continue.
1.
Select all malicious code to quarantine or allow.
2.
Select Block or Allow. This moves the selected malicious code to the Isolated List or Allowed
List.
"
The Isolated List displays all blocked malicious code. You can also relocate codes from this list to the
Allowed List. Try Now
"
The Allowed List displays all allowed malicious code. You can also relocate codes from this list to the
Isolated List. Try Now
Automatically Scanning when the TV is Powered On
MENU > System > Smart Security > Settings > Auto Scan
Navigate to System > Smart Security > Settings and then set Auto Scan to On. This automatically
scans the TV and connected storage media when the TV is powered on.
Automatically Adding malicious code to the Blocked List
MENU > System > Smart Security > Settings > Move to Isolated List automatically
Navigate to System > Smart Security > Settings and set Move to Isolated List automatically to On.
Malicious code found during the scanning process is automatically added to the Blocked List.
To Next Page
Loading...
