.....
;
C
~
.•
()
18
Change the code set by tapping or and then
select
<Send IR>.
If the external device turns on or off, select
<Apply> to
register the external device.
If you can't find codeset on the list. tap
<Learn>
to
start the remote's external device registration process.
•
Tap
<Help> for learning guide or tap <OK> to start
learning.
You
must
now
assign the control buttons on the
device's remote
to
corresponding buttons on the LCD
remote.
To
begin, tap a button on the LCD remote's
screen
to
which you want to assign a button from the
device's remote.
• The selected button blinks.
Press the corresponding button on the device's remote.
• When the button
LCD
remote's stops blinking, the
assignment
is
complete. Assign the other buttons
in
the
same
way.
•
To
register the Channel,
Volume
and Mute buttons on
an
external device, tap <VOUCH> at the top of the
touch remote.
Select
<OK>
to
complete the registration.
To Next Page
Loading...
