Samsung UN46C9000 - First Time User Setup

First Time User Setup
5
Select <OK> to connect the touch remote. If you want
to connect to
it later or if you have changed the touch
remote
to a new one, select <Skip>. If you selected
<Skip>,
refer to "Setting up the Network" (p. 7) when you
want to connect the lV and touch remote.
•
The Samsung Wireless LAN Adapter must be connected
to the TV before you establish a connection.
• The Samsung Wireless LAN Adapter and touch remote
must be parallel and no farther than 8 inches (2Ocm)
apart.
• If you are failed, reconnect the Sam sung Wireless LAN
Adapter, and then try again.
• For initial TV settings, refer to the TV manual.
The default setup screen appears when your touch remote is turned on for the first
time. To connect the touch remote to the lV, you must complete the following steps.
Select
the desired language, and then tap <OK>.