The default setup screen appears when your touch remote
IS
turned on for the first
time.
To
connect the touch remote to the
N.
you must complete the following steps.
Select the desired language. and then tap <OK>.
Select <OK> to connect the touch remote and
N
or
select
<Skip> to connect later.
If
you selected <Skip>. refer
to
"Setting
up
the Network"
(p
4)
when you want
to
connect the
Nand
touch remote,
•
The
Samsung Wireless
LAN
Adapter must
be
connected
to
the N
before you establish a connection,
•
The
Samsung Wireless
LAN
Adapter and touch remote must
be
parallel and no farther than 8 Inches (20cm) apart,
•
If
you
are
failed, reconnect the Samsung Wireless
LAN
Adapter,
and then try again.
•
For
InltlalN
settings.
refer
to the N manual.
3
To Next Page
Loading...
