To Next Page
C
Charles SmithAug 14, 2025
What does STD LED blinking mean on Samsung US09A6MAF Air Conditioner?
- AAshley HernandezAug 14, 2025
STD LED blinking (1Hz) means that the Air Conditioner restores from power failure (input initial power).
What does STD LED blinking mean on Samsung US09A6MAF Air Conditioner?
STD LED blinking (1Hz) means that the Air Conditioner restores from power failure (input initial power).
What does TIMER LED blinking mean on Samsung US09A6MAF?
TIMER LED blinking (1Hz) means that the Indoor unit Room sensor has an Error (open or short).
What does STD and TIMER LED blinking mean on Samsung US09A6MAF Air Conditioner?
STD and TIMER LED blinking (1Hz) means that the Indoor unit heat exchanger temperature sensor has an Error (open or short).
What to do if my Samsung US09A6MAF Air Conditioner does not operate but the timer LED is on?
If your Samsung Air Conditioner doesn't operate while the timer LED is lit, the timer is likely activated, placing the unit in ready mode. To resolve this, cancel the timer operation, and the unit should operate normally.
Why my Samsung US09A6MAF Air Conditioner may not operate properly?
Your Samsung Air Conditioner might not be operating correctly if the input voltage isn't within the appropriate range. Ensure the input voltage is within ±10% of the voltage rating.
Why does the compressor stop and fan speed decrease on my Samsung US09A6MAF?
The compressor in your Samsung Air Conditioner might stop intermittently, and the indoor fan speed may decrease in Cool or Dry mode to prevent the air from freezing, depending on the inside and outside air temperatures.
Why does my Samsung Air Conditioner compressor stop in Dry mode?
In Dry mode, the compressor of your Samsung Air Conditioner is automatically controlled based on the room temperature and humidity, which may cause it to stop intermittently.
What does NATURE LED blinking mean on Samsung US09A6MAF?
NATURE LED blinking (1Hz) means that the Indoor fan is malfunctioning (for speed is below 450rpm).
What does All LED blinking mean on Samsung Air Conditioner?
All LED blinking (1Hz) means that there is an Option Error.
Essential safety instructions for installation and operation.
Step-by-step guide for taking apart the indoor air conditioner unit.
Step-by-step guide for taking apart the outdoor air conditioner unit.
Disassembly steps for outdoor unit US12AA(B)MCF.
Guide on how to set up model option codes using the remote control.
Basic troubleshooting steps and items to check first for common issues.
Detailed troubleshooting guide based on observed symptoms and diagnostic flowcharts.
Troubleshooting procedure for outdoor units that do not power on.
Troubleshooting steps for when the indoor unit fan fails to operate.
Troubleshooting guide for when the outdoor unit does not operate.
Diagnostic steps for UP/DOWN louver motor operational issues.
Troubleshooting steps when the unit does not provide cool air.
Diagnostic procedure for when the remote control is not working.
Exploded view diagrams and part numbers for the indoor unit.
Exploded view diagrams and part numbers for outdoor units US07A5(6)MA/US09A5(6)MAF.
Exploded view diagrams and part numbers for outdoor unit US12AA(B)MCF.
Diagrams and part lists for internal assembly control components.
Diagrams and part lists for external assembly control components.
Block diagram of the refrigerating cycle with temperature and pressure conditions.
Performance graphs for power consumption and capacity for AS07A5(6)MA.
Performance graphs for power consumption and capacity for AS09A5(6)MAF.
Performance graphs for power consumption and capacity for AS12AA(B)MCF.
Electrical wiring diagrams for the indoor unit.
Electrical wiring diagrams for the outdoor unit.
Detailed electronic schematic for the indoor unit.
Detailed electronic schematic for the outdoor unit.
General| Brand | Samsung |
|---|---|
| Model | US09A6MAF |
| Category | Air Conditioner |
| Language | English |