Samsung VCC7490 - Page 15

troubleshooting _15
04 TROUBLESHOOTING
troubleshooting
PROBLEM SOLUTION
Motor dows not start.
• Check cable, pulg and socket.
• Leave to cool.
Suction force is gradually
decreasing.
• Check for blockage and remove.
Cord does not rewind
fully.
• Pull the cord out 2-3m and push down the cord rewind button.
Vacuum cleaner dows
not pick up dirt.
• Check hose and replace if required.
Low or decreasing
suction
• Pleasechecklterand,ifrequired,cleanasillustratedinthe
instructions.
This Vacuum cleaner is approved the following.
Electromagnetic Compatibility Directive : 2004/108/EEC
Low Voltage Directive : 2006/95/EC
DJ68-00534G(0.0).indb 15 2010.7.9 2:5:44 PM