ENGLISH DEUTSCH
Digitalkamera-Modus
(nur VP-D33(i)/D34(i)/D39(i))
9191
Digital Still Camera mode (VP-D33(i)/D34(i)/D39(i) only)
✤ This camcorder supports the DPOF (Digital Print Order Format)
print format.
✤ You can automatically print images recorded on a Memory Stick
with a printer supporting DPOF.
✤ There are 2 ways to make a PRINT MARK.
■
THIS FILE : You can set a print mark on the photo image
displayed on the LCD.
■
ALL FILES : To print 1 copy each of all of the
stored images.
1. Set the mode switch to MEMORY STICK.
2. Set the power switch to PLAYER.
■
The last recorded image appears.
3. Using the (FWD) and (REV) buttons,
search for the still image that you want to mark.
4. Press the MENU button.
5. Move the MENU SELECTOR to highlight
MEMORY and push the MENU SELECTOR.
■
The MEMORY SET submenu will appear.
6. Move the MENU SELECTOR to highlight
PRINT MARK, push the MENU SELECTOR.
7. Use the MENU SELECTOR to select either
THIS FILE or ALL FILES and push the MENU
SELECTOR.
8. Use the MENU SELECTOR to select the quantity and push the
MENU SELECTOR.
Notes
■
When you setup the PRINT MARK option to ALL FILES, 999 files
from the current file are set to 1 or 0.
■
The ALL FILES option may require extended operation time
depending on the number of stored images.
Marking images for printing
✤ Dieser Camcorder unterstützt das Druckformat DPOF (Digital Print
Order Format).
✤ Auf dem Memory Stick bzw. der Karte gespeicherte Bilder können Sie
mit einem Drucker, der DPOF unterstützt, automatisch ausdrucken.
✤ Es gibt zwei Möglichkeiten, eine DPOF-Marke zu setzen.
■
THIS FILE: Nur das auf dem LCD-Monitor angezeigte Bild
wird mit einer Druckmarke versehen.
■
ALL FILES: Zum Drucken je eines Abzugs aller gespeicherten Bilder.
1. Stellen Sie den Funktionsschalter auf
MEMORY STICK.
2. Stellen Sie den Betriebsmodus-Schalter auf
PLAYER.
■
Das zuletzt gespeicherte Bild wird angezeigt.
3. Wählen Sie mit den Tasten (FWD) und
(REV) das gewünschte Bild aus.
4. Drücken Sie die Taste MENU.
5. Wählen Sie mit dem Menü-Einstellrad die Option
MEMORY aus, und drücken Sie auf das Menü-
Einstellrad.
■
Das Untermenü MEMORY SET wird angezeigt.
6. Wählen Sie mit dem Menü-Einstellrad die Option
PRINT MARK aus, und drücken Sie auf das
Menü-Einstellrad.
7. Wählen Sie mit dem Menü-Einstellrad die Option THIS FILE
(diese Datei) oder ALL FILES (alle Dateien) aus, und drücken Sie
auf das Menü-Einstellrad.
8. Wählen Sie mit dem Menü-Einstellrad die gewünschte Anzahl aus,
und drücken Sie auf das Menü-Einstellrad.
Hinweise
■
Wenn Sie die Option ALL FILES auswählen, werden bis zu 999
Dateien im aktuellen Verzeichnis auf 1 bzw. 0 gesetzt.
■
Je nach Anzahl der gespeicherten Bilder kann das Ausführen der
Option ALL FILES einige Zeit in Anspruch nehmen.
Bilder mit einer Druckmarke versehen
00654F VP-D30-UK+GER(60~106) 5/6/03 9:08 AM Page 91