1-8
Samsung Electronics
Disassembly and Reassembly
1-2-9 Motor Loading Ass’y Removal
1) Remove the screw Œ.
2) Remove the Motor Loading AssÕy ´.
1-2-10 Gear Loading Drive, Slider Cam,
Lever T, S Load Ass’y Removal
1) Remove the Belt Pulley. (Refer to Fig. 1-29)
2) Remove the Gear Loading Drive Πafter releasing
Hook [A] in the direction arrow as shown in detail
drawing.
3) Remove the Slider Cam ´.
4) Remove the Lever T, S Load AssÕy ˇ, ¨.
Fig. 1-12 Motor Loading Ass’y Removal
Fig. 1-13 Gear Loading Drive, Slider Cam,
Lever T, S Load Ass’y Removal
To Next Page
