Samsung WA48H7400A Series - Page 33

English - 33
CODE SYMBOL MEANING SOLUTION
8E
8E2
Mems sensor problem. Call for service.
tE1
Temperature sensor problem. Restart the cycle.
If the code reappears, call for service.
OE
A fault is detected in the water
level sensor.
Call for service.
4E2
This occurs when the temperature
exceeds 50, for over 8 seconds in
the Wool and Delicates cycle.
Call for service.
PE
When position of the clutch can’t
be detected.
Call for service.
PE1
After position of the clutch is
detected, if the signal of the clutch
hall goes wrong, occurs error.
Call for service.
AE6
Commuication error between
INVERTER PBA and MAIN PBA.
Call for service.
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG).
05 troubleshooting
WA7000HA WASH_WA48H_USER MANUAL_DC68-03133P-01_EN.indd 33 2014-1-10 15:41:54