To Next PageTo Next PageHow to check drain in Samsung Washer?
To check the drain in your Samsung washer, examine the draining pump motor for any foreign objects. Inspect the natural drain for blockages as well. Also, verify all connections and wires are correctly connected and not broken. If the washer malfunctions when the water temperature is high, the pump may need replacing. If the motor stops due to frozen water, remove the ice.
What to do if Samsung Washer has door check problem?
If your Samsung washer has a door check problem, the main PBA door detection circuit might be defective, requiring replacement.
What to do if my Samsung WA48J7700AW/A2 Washer has water supply problems?
If your Samsung washer isn't getting water, several things could be the cause. First, the water supply valve may be broken and needs replacement. Also, the water supply could be blocked by a foreign object in the valve, or the water might be frozen. Finally, a malfunctioning PBA relay could also be the issue, requiring PBA replacement. Check these components and take appropriate action.
What to do if my Samsung WA48J7700AW/A2 Washer has communication issues?
If your Samsung washer is experiencing communication issues, start by checking the wire connections and terminal contacts between the sub and main PBAs. Look for any disconnected wires. Also, check if the sub PBA is short-circuited due to moisture. If the main PBA’s communication circuit is faulty, it may need to be replaced.
How to check motor driving and hall sensor on Samsung Washer?
To check the motor driving and hall sensor on your Samsung washer, inspect the motor connector terminal connections. Verify the motor cover is not damaged. Check the coil for breaks due to moisture or foreign substances. If the PBA control circuit is defective, the PBA may need replacement.
How to check temperature sensor in Samsung Washer?
To check the temperature sensor in your Samsung washer, first check the connections for the washing heater temperature sensor connector. If the washing heater temperature sensor has a functional error, replace it. Check the connections for the dry heater temperature sensor connector. If the dry heater temperature sensor has a functional check, replace it.
How to troubleshoot water level sensor on Samsung Washer?
To troubleshoot the water level sensor on your Samsung washer, begin by checking the water level sensor terminal connections. Ensure the correct part code for the water level sensor is used, as an incorrect part can cause abnormal operation. If the water level sensor is defective, replace it. If these steps don't resolve the issue, consider replacing the PBA.
Provides essential safety guidelines for personnel servicing the washing machine.
Details the key features and technologies of the top-loading washing machine.
Outlines the technical specifications, dimensions, and performance metrics of the washer.
Provides a comparative overview of detailed features across different model grades.
Lists optional accessories and their corresponding part numbers and remarks.
Lists the specific tools required for safely disassembling and reassembling the washing machine.
Illustrates the step-by-step process for disassembling various components of the washing machine.
Explains integrated information modes used for diagnosing washer operational issues.
Details specific countermeasures and procedures for various error check codes.
Guides on how to properly level the washing machine for optimal operation.
Presents the schematic diagram and component layout for the main printed circuit board.
Provides detailed information on connectors and relay terminals on the main PCB.
Shows the component layout and functional overview of the sub printed circuit board.
Details the connector terminals and pin assignments for the sub PCB.
Illustrates the electrical connections and wiring schematic of the washing machine.
Explains the convention and structure used in the model numbers for identification.
General