EasyManua.ls Logo

Samsung WA48J7770AP/A2 - Page 28

Samsung WA48J7770AP/A2
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26 _ Troubleshooting
Symptom Check Code Countermeasure Troubleshooting Procedure Measurement Picture
WaterLeakage
Check
►LC
LC1
This may occur when an
alien substance is in the DV
Case.
• Sincethisoccurswhenanaliensubstanceis
intheDrainingBellows,fornaturaldraining,
remove the alien substance.
• Ifthedrainmotorisdefective,replacethe
motor.
• Checkifthewaterleaksfromthetub
connection part.
Checkifthereisanyalien
substance in the Draining Bellows.
Checkifthereisanyalien
substance such as underwear
wire,coins,etc.
This may occur due to a
defectoftheproduct’s
internal hose or from the part
assembly.
Unbalance
Check
►UB
This may occur due to the
laundry being unevenly
distributed.
• Checkthelaundrytypeandcheckifthe
laundry load is unbalanced.
-Makesuretocheckifthereisanylaundry
present that absorbs a lot of water even if
itsvolumeissmallandexplaintheproblem
comprehensively,ifnecessary.
-
MemsPBA
Detected
►8C
►8C1
►8C2
This may occur due to
disconnection. • Checkwireconnections.
-
This may occur when the
MemsPBAisdefective.
• ReplacetheMemsPBA.
• ReplaceMemsPBAbecauseofthemain
PBAwiredisconnectionCheckorPBAsilver
nano part malfunction.
OverowCheck ►OC
This may occur when the
water level sensor is
defective.
This may occur when water
is supplied continuously
due to freezing or foreign
materials in the water
supply valve.
• Thewaterlevelsensorisreplaced.
-

Related product manuals