English
English 33
Simple steps to start
1. Press POWER to turn on the washer.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Temp., Spin, and Soil) as necessary.
4. Select desired options as necessary.
5. Press START/PAUSE.
To change the cycle during operation
1. Press START/PAUSE to stop operation.
2. Select a different cycle, and then repeat steps 2-3 above if necessary.
3. Press START/PAUSE again to start the new cycle.
Untitled-1 33 2022-05-13 11:31:47
To Next Page
Loading...
