M
Mark CampbellSep 9, 2025
How to fix MEMS error on Samsung WA5451ANW/XAA?
- TtranchristieSep 9, 2025
A MEMS error on your Samsung Washer indicates that the output from the MEMS sensor is over 4.5V or under 0.5V. Check the MEMS sensor.
To Next PageTo Next PageHow to fix MEMS error on Samsung WA5451ANW/XAA?
A MEMS error on your Samsung Washer indicates that the output from the MEMS sensor is over 4.5V or under 0.5V. Check the MEMS sensor.
What to do if my Samsung Washer has a drain error?
If your Samsung Washer displays a drain error, it could be due to a clogged drain hose. Make sure to clear the drain hose. Also, check the water pump connections to ensure the water pump terminal is connected correctly.
Why does my Samsung Washer show an unbalance error?
If your Samsung Washer displays an unbalance error, it is likely due to the laundry load. Find the reason for the imbalance and solve it as directed in the user manual.
Why Samsung WA5451ANW/XAA Washer won't start?
If your Samsung Washer won't start, make sure the door is completely closed and that the appliance is properly plugged into a working outlet. Also, ensure the water source faucets are fully open and that you've pressed the Start/Pause button. It's also worth checking that the Child Lock feature isn't activated. If none of these steps work, inspect the fuse or reset the circuit breaker. Note that before the washer starts filling, it will make clicking noises as it checks the door lock and performs a quick drain.
Why is my Samsung WA5451ANW/XAA Washer vibrating too much?
Excessive vibration or noise in your Samsung Washer can occur if the appliance isn't set on a level surface. Ensure the shipping bolts have been removed from the unit. Also, check that the washer isn't touching any surrounding objects and that the laundry load inside is balanced properly.
What to do if Samsung WA5451ANW/XAA Washer stops mid cycle?
If your Samsung Washer stops during a cycle, ensure it's plugged into a live electrical outlet and check the fuse or reset the circuit breaker. Verify the door is fully closed and press the Start/Pause button; the washer won't spin with an open door. Note that the washer makes clicking noises and does a quick drain before filling. There may also be a pause or soak period in the cycle, so allow some time. Lastly, inspect the inlet hose screens for obstructions and clean them if necessary.
How to resolve a temperature sensor error on a Samsung WA5451ANW/XAA Washer?
If your Samsung Washer displays a temperature sensor error, there may be an issue with the washing heater in the tub. Resolve the contact error or temperature sensor fault.
What to do if my Samsung Washer shows Switch Error (Main Relay Error)?
If your Samsung Washer displays a Switch Error (Main Relay Error), it means the Power button is continually pressed. Release the Power button.
How to fix Communication Error on Samsung Washer?
A Communication Error on your Samsung Washer means the signals between the sub and main PBAs are not being sensed. To resolve this, carefully check the connector connections between the sub and main PBAs.
How to fix Temperature Sensor Error on Samsung WA5451ANW/XAA?
A Temperature Sensor Error on your Samsung Washer indicates an issue with the washing heater in the tub, such as a contact error or temperature sensor fault. To fix this, check the heater sensor and wire connections.
Reduces noise and vibration during spin cycles.
Explains warning icons and general safety rules for operation.
Critical warnings for electrical, grounding, and water hookups during installation.
Precautions for safe operation, avoiding hazards, and cleaning procedures.
Guidelines for selecting a location and ensuring proper electrical connection and grounding.
Step-by-step guide for connecting water supply and drain hoses.
Procedures for leveling, powering, and testing the washer after installation.
Solutions for issues like not starting, no water, vibration, or stops.
Explanation of error codes displayed by the washer and their solutions.
General