To Next PageTo Next PageWhat does Foaming Detected mean on my Samsung Washer?
If your Samsung Washer displays 'Foaming Detected', it means the washer has detected too much foam. This is a normal operation to prevent non-sensing faults.
How to fix Communication Error on Samsung Washer?
A Communication Error on your Samsung Washer means the signals between the sub and main PBAs are not being sensed. To resolve this, carefully check the connector connections between the sub and main PBAs.
How to fix MEMS error on Samsung WA5451ANW/XAA?
A MEMS error on your Samsung Washer indicates that the output from the MEMS sensor is over 4.5V or under 0.5V. Check the MEMS sensor.
What to do if my Samsung Washer shows Switch Error (Main Relay Error)?
If your Samsung Washer displays a Switch Error (Main Relay Error), it means the Power button is continually pressed. Release the Power button.
Why does my Samsung WA5451ANW/XAA Washer show a communication error?
If your Samsung Washer displays a communication error, the signals between the sub and main PBAs are not being sensed. Check for incorrect or loose connections to resolve this issue.
How to resolve a temperature sensor error on a Samsung WA5451ANW/XAA Washer?
If your Samsung Washer displays a temperature sensor error, there may be an issue with the washing heater in the tub. Resolve the contact error or temperature sensor fault.
Reduces noise and vibration during spin cycles.
Explains warning icons and general safety rules for operation.
Critical warnings for electrical, grounding, and water hookups during installation.
Precautions for safe operation, avoiding hazards, and cleaning procedures.
Guidelines for selecting a location and ensuring proper electrical connection and grounding.
Step-by-step guide for connecting water supply and drain hoses.
Procedures for leveling, powering, and testing the washer after installation.
Solutions for issues like not starting, no water, vibration, or stops.
Explanation of error codes displayed by the washer and their solutions.
General