Samsung WA54M8750A SERIES User Manual (English)

Questions and Answers:

J
Janice ChavezAug 21, 2025
What to do if my Samsung WA54M8750A does not start?
- M
  marc76Aug 21, 2025
  If your Samsung Washer isn't starting, there could be several reasons. First, ensure the door is completely closed. Also, check that the water taps are open. You need to press or tap the Start/Pause button to initiate the wash cycle. Make sure that the Child Lock feature is not activated. If the door was opened during the spin cycle, close it and press Start/Pause to resume. The machine might be in Standby or in a soaking cycle, so allow it some time. Finally, check the fuse or reset the circuit breaker.
J
Jessica MackAug 22, 2025
How to fix a Samsung WA54M8750A that does not turn on?
- R
  Roger MartinAug 22, 2025
  If your Samsung Washer isn't turning on, ensure that you are using the correct rated power for the appliance. Verify that the power cord is fully plugged into the outlet. If the issue persists, check the fuse or reset the circuit breaker.
K
kingfeliciaAug 25, 2025
Why does my Samsung WA54M8750A not drain and/or spin?
- K
  Katherine MartinezAug 25, 2025
  If your Samsung Washer isn't draining or spinning, verify the fuse and electrical voltage are normal, and that the washer is plugged in. For natural drain models, ensure the drain hose points downward and isn't clogged or kinked; straighten it if necessary. Close the door and press Start/Pause, as the washer won't spin with an open door. If a drain restriction exists, call for service.
J
Jonathan WeeksAug 26, 2025
Why is my Samsung WA54M8750A leaking water?
- D
  David JonesAug 26, 2025
  If your Samsung Washer is leaking water, check that all hose connections are tight and the rubber washers are correctly positioned. Ensure the drain hose is properly inserted and secured, and avoid overloading the machine. Use high-efficiency (HE) detergent to prevent oversudsing. Also, make sure the water supply hose isn't kinked, and if the water pressure is too high, slightly close the water tap. Finally, check the water tap itself for leaks and repair if needed.
J
Jeffrey GrossAug 27, 2025
What to do if the door (lid) of my Samsung Washer is locked?
- M
  Michael MartinezAug 27, 2025
  If the door (lid) of your Samsung Washer is locked or won't open, press Start/Pause to stop the washing machine. It may take a few moments for the door lock mechanism to disengage.
T
Taylor RiceAug 29, 2025
Why is water not being supplied to my Samsung WA54M8750A Washer?
- K
  Kyle FigueroaAug 29, 2025
  If water is not being supplied to your Samsung Washer, ensure you press or tap Start/Pause after selecting the water supply. Check that the water taps are fully open. Inspect the filter net at the water supply hose connector for clogs and clean it with a toothbrush if necessary. If the water supply is cut off, close the tap and power off the machine. Make sure the water supply hoses are not kinked or bent. Try opening and closing the door, then press Start/Pause. Keep in mind that low water pressure can extend the wash start time. Adjust the water level using the level selector if it's lower than expected.
K
kloweAug 31, 2025
What to do if detergent remains in the dispenser of my Samsung Washer after a cycle?
- J
  Jennifer CallahanAug 31, 2025
  If detergent remains in the automatic dispenser of your Samsung Washer after a cycle, ensure the washing machine is running with sufficient water pressure. Check that the detergent drawer is properly inserted. Try removing and cleaning the detergent drawer before trying again.
N
natalie30Sep 1, 2025
What to do if water is not supplied to my Samsung Washer?
- R
  Richard NguyenSep 2, 2025
  If water isn't being supplied to your Samsung Washer, make sure you press Start/Pause after selecting the cycle and options, and that the water taps are open. Check the mesh filters in the water inlets for clogs, and ensure the water supply isn't cut off. Straighten any kinks in the water supply hoses. Opening and closing the door before pressing Start/Pause might also help. Note that low water pressure can extend the wash start time. If the water level seems off, adjust it using the level selector.
T
Timothy KnightSep 3, 2025
How to reduce vibration and noise in my Samsung WA54M8750A?
- R
  Richard WrightSep 3, 2025
  If your Samsung Washer vibrates excessively or makes noise, ensure it's on a level floor and not touching anything. Balance the laundry load and spread it evenly. Keep the area around the washer clear. Humming during operation is normal. Remove any objects like coins from the washer after the cycle.
R
Rachel FoxSep 5, 2025
How to prevent excessive suds in my Samsung WA54M8750A Washer?
- J
  Jo SalazarSep 5, 2025
  If your Samsung Washer has excessive suds, use high-efficiency (HE) detergent. Reduce the detergent amount if you have soft water, small loads, or lightly soiled loads. Non-HE detergent is not recommended.

Samsung WA54M8750A SERIES Specifications

General

Capacity	5.4 cu. ft.
Type	Top Load Washer
Control Type	Digital
Steam	Yes
Vibration Reduction Technology (VRT)	Yes
Number of Wash Cycles	12
Bleach Dispenser	Yes
Fabric Softener Dispenser	Yes
Internal Heater	Yes
Self Clean	Yes
EZ Access	Yes
ENERGY STAR Certified	Yes
AddWash Door	Yes
Width	27 in
Smart Features	Wi-Fi Connectivity