How to reduce vibration and noise in my Samsung WA54M8750A?
If your Samsung Washer vibrates excessively or makes noise, ensure it's on a level floor and not touching anything. Balance the laundry load and spread it evenly. Keep the area around the washer clear. Humming during operation is normal. Remove any objects like coins from the washer after the cycle.
What to do if water is not supplied to my Samsung Washer?
If water isn't being supplied to your Samsung Washer, make sure you press Start/Pause after selecting the cycle and options, and that the water taps are open. Check the mesh filters in the water inlets for clogs, and ensure the water supply isn't cut off. Straighten any kinks in the water supply hoses. Opening and closing the door before pressing Start/Pause might also help. Note that low water pressure can extend the wash start time. If the water level seems off, adjust it using the level selector.
What to do if detergent remains in the dispenser of my Samsung Washer after a cycle?
If detergent remains in the automatic dispenser of your Samsung Washer after a cycle, ensure the washing machine is running with sufficient water pressure. Check that the detergent drawer is properly inserted. Try removing and cleaning the detergent drawer before trying again.
Why is water not being supplied to my Samsung WA54M8750A Washer?
If water is not being supplied to your Samsung Washer, ensure you press or tap Start/Pause after selecting the water supply. Check that the water taps are fully open. Inspect the filter net at the water supply hose connector for clogs and clean it with a toothbrush if necessary. If the water supply is cut off, close the tap and power off the machine. Make sure the water supply hoses are not kinked or bent. Try opening and closing the door, then press Start/Pause. Keep in mind that low water pressure can extend the wash start time. Adjust the water level using the level selector if it's lower than expected.
What to do if the door (lid) of my Samsung Washer is locked?
If the door (lid) of your Samsung Washer is locked or won't open, press Start/Pause to stop the washing machine. It may take a few moments for the door lock mechanism to disengage.
Why is my Samsung WA54M8750A leaking water?
If your Samsung Washer is leaking water, check that all hose connections are tight and the rubber washers are correctly positioned. Ensure the drain hose is properly inserted and secured, and avoid overloading the machine. Use high-efficiency (HE) detergent to prevent oversudsing. Also, make sure the water supply hose isn't kinked, and if the water pressure is too high, slightly close the water tap. Finally, check the water tap itself for leaks and repair if needed.
Why does my Samsung WA54M8750A not drain and/or spin?
If your Samsung Washer isn't draining or spinning, verify the fuse and electrical voltage are normal, and that the washer is plugged in. For natural drain models, ensure the drain hose points downward and isn't clogged or kinked; straighten it if necessary. Close the door and press Start/Pause, as the washer won't spin with an open door. If a drain restriction exists, call for service.
How to fix a Samsung WA54M8750A that does not turn on?
If your Samsung Washer isn't turning on, ensure that you are using the correct rated power for the appliance. Verify that the power cord is fully plugged into the outlet. If the issue persists, check the fuse or reset the circuit breaker.
General| Capacity | 5.4 cu. ft. |
|---|---|
| Type | Top Load Washer |
| Control Type | Digital |
| Steam | Yes |
| Vibration Reduction Technology (VRT) | Yes |
| Number of Wash Cycles | 12 |
| Bleach Dispenser | Yes |
| Fabric Softener Dispenser | Yes |
| Internal Heater | Yes |
| Self Clean | Yes |
| EZ Access | Yes |
| ENERGY STAR Certified | Yes |
| AddWash Door | Yes |
| Width | 27 in |
| Smart Features | Wi-Fi Connectivity |
Key safety precautions to prevent fire, electric shock, and injury during operation.
Critical warnings and cautions related to appliance installation and safe usage.
Comprehensive guide for installing the washer, including connecting hoses and leveling.
Details on Child Lock, My Cycle, Delay End, and other wash options.
Solutions for typical washer issues like not starting or water supply problems.
Explanation of error codes displayed by the washer and their meanings.
A reference chart for setting cycles, temperatures, spin speeds, and soil levels.
To Next Page