To Next PageTo Next PageWhy is my Samsung WA75H4400SS Washer not working?
Your Samsung Washer might not be working because the water tap isn't open, the washer isn't plugged in, there's a power outage, or there isn't enough water supply. Check these to ensure proper operation.
What to do if the Samsung Washer water does not drain?
If the water in your Samsung Washer isn't draining, check if the drain hose is down (for models without a pump), frozen, or clogged. Also, if the water doesn't drain within 30 minutes, the display will show “5E” and a buzzer will sound.
What to do if Samsung WA75H4400SS Washer has a water leakage error?
If you're experiencing a water leakage error with your Samsung Washer, ensure the drain hose end is correctly placed above the pump hose guide and not on the floor. Also, inspect the drain hose for any clogs caused by foreign substances.
How to fix Samsung Washer when spinning does not work?
If the spinning function isn't working on your Samsung Washer, make sure the laundry is spread evenly inside the washer. Also, ensure the washer is placed on a sturdy, flat surface.
What to do if water does not drain from my Samsung WA75H4400SS Washer?
If your Samsung Washer won't drain water, several factors could be at play. First, ensure the drain hose is properly positioned—it should be down if there's no pump. Check if the drain hose is frozen or clogged. Also, if the water doesn't drain within 30 minutes, the washer will sound a buzzer, and the display will show '5E'.
What to do if there's a water leakage error in my Samsung WA75H4400SS Washer?
If you notice a water leakage error with your Samsung Washer, first, check that the end of the drain hose is correctly positioned above the pump hose guide and not resting on the floor. Then, inspect the drain hose for any blockages caused by foreign substances. If the problem continues, it is recommended to contact a service center.
Why is my Samsung WA75H4400SS not supplying water?
If your Samsung Washer isn't getting water, make sure the water tap is open and that water isn't cut off. Also, check the water supply hose and its connections for any clogs, and ensure the water tap isn't frozen. If water supply isn't finished in 1 hour, or there is no change in the water level 5 minutes (10 minutes for some models) after the water supply has started, the buzzer rings and “4E” is displayed on the remaining time indicator.
What does it mean when my Samsung WA75H4400SS Washer indicates a Child Lock error?
If your Samsung Washer displays “CL” or “dE” and is draining water with an alarm, it indicates a Child Lock error. After draining is complete, turn the power off and then on to operate normally. To clear the “CL” display, close the door, turn the power off and then on. Also, check if the Start/Pause button is pressed.
Why is water not being supplied to my Samsung Washer?
If your Samsung Washer isn't supplying water, check a few things: Ensure the water tap is fully open and that the water supply isn't cut off. Inspect the water supply hose and its connections for any clogs. Also, verify that the water tap isn't frozen. If the water supply isn't completed within 1 hour, or if there's no water level change after 5 minutes (10 minutes for some models), the buzzer will sound, and '4E' will appear on the display.
How to troubleshoot a Samsung WA75H4400SS that won’t work?
To troubleshoot why your Samsung Washer isn’t working, check the following: Is the water tap opened? Is the washer properly plugged in? Is there a power outage? Is there enough water supply?
General
