20_installation & maintenance
installation & maintenance_21
CALIBRATION MODE
Your Samsung washing machine detects the laundry weight automatically.
For more accurate weight detection, please run Calibration Mode after the installation.
To run Calibration Mode, follow these steps:
1. Remove laundry or any contents in the machine.
2. Press the Delay End and Spin buttons simultaneously, and then press the Power button. The Machine
turns on with “Cb”
3. Press the Start/Pause button to activate “Calibration Mode”.
4. The drum rotates for approximately 4 minutes.
5. When “Calibration Mode” is finished, “End” appears on the display, and the machine automatically
turns off. The washing machine is now ready for use.
installation & maintenance
W3050_WA18F7_EN_130319.indd 20 2013-03-19 �� 6:59:06
To Next Page
Loading...
