- 51 -
6.2.7 Show Multi-window Tips
If a specific window operates as a full window in Multi-window mode, it
provides Tips to guide the window control bar.
6.3 Input & Output
6.3.1 Touch Sound
You can use this configuration to set whether or not to enable touch sounds
on your device.
6.3.2 Sound Out Settings
This allows you to switch the sound output source of the device, such as
headphone and speaker. It can automatically switch the appropriate sound
output source when you connect or unplug the headset.
The output is from the speaker of this device.
The output is from the device that is connected to the rear
AUDIO OUT interface.
The output is from mixed sources.
6.3.3 Input Naming Settings
This setting allows you to enable channel aliases, you can customize your channel
name and apply it to the OSD menu and channel display.
6.3.4 HDMI OUT Format
A display format output through the HDMI OUT port may be set.
The supported display format is either 3840×2160_60Hz or 1080P_60Hz.
6.4 Application
To Next Page
Loading...
